42
16. Disc and Spline Shaft List
Table 49
Frame size
N02A
N05A
N02B 3–23
6123
6123
9223
12323
15423
18523
24723
27823
33 10 2 3
36 11 2 3
27823
36824
60926
72828
88 10 2 8
3661–2 3
3962–2 3
3661–2 3
4992–2 3
41293–2 3
515124–2 3
518125–2 3
N1A
N2A
N3A
N5A
N8A
N10A
15A
20A
30A
40A
50A
75A
100A
150A
200A
N05D
N1D
N2D
N3D
N5D
N8D
N10D
Note: For D Type (N05D–N10D), left side shows quantity of discs on 1st stage and right side quantity of
discs on 2nd stage.
N05B
N1B
N2B
N3B
N5B
N8B
10B
15B
20B
30B
50B
75B
100B
150B
Cone disc
Flange disc
III
Spline shaft
COMMON
17.Warranty
Warranty
Period
Warranty
Condition
Warranty
Exclusions
Not withstanding the above warranty, the warranty as set forth herein shall not apply to any problem or damage to the
Product that is caused by :
1. installation, connection, combination or integration of the Product in or to the other equipment or machine that is
rendered by any person or entity other than the Seller ;
2. insufficient maintenance or improper operation by the Buyer or its customers, such that the Product is not
maintained in accordance with the maintenance manual provided or designated by the Seller ;
3. improper use or operation of the Product by the Buyer or its customers that is not informed to the Seller, including,
without limitation, the Buyer's or its customers' operation of the Product not in conformity with the specifications, or
use of lubricating oil in the Product that is not recommended by the Seller ;
4. any problem or damage to any equipment or machine to which the Product is installed, connected or combined, or
on any specifications particular to the Buyer or its customers ;
5. any changes, modifications, improvements or alterations to the Product or those functions that are rendered on the
Product by any person or entity other than the Seller ;
6. any parts in the Product that are supplied or designated by the Buyer or its customers ;
7. earthquake, fire, flood, sea-breeze, gas, thunder, acts of God or any other reasons beyond the control of the Seller ;
8. normal wear and tear, or deterioration of the Product's parts, such as bearings, oil-seals ;
9. any other troubles, problems or damage to the Product that are not attributable to the Seller.
The warranty period for the Products shall be 18 months after the commencement of delivery or 18 months after the shipment
of the Products from the seller's works or 12 months from the Products coming into operation, whithever comes first.
In the event that any problem or damage to the Product arises during the "Warranty Period" from defects in the Product
whenever the Product is properly installed and combined with the Buyer's equipment or machines, maintained as
specified in the maintenance manual, and properly operated under the conditions described in the catalog or as
otherwise agree upon in writing between the Seller and the Buyer or its customers; the Seller will provide, at its sole
discretion, appropriate repair or replacement of the Product, without charge, at a designted facility, except as stipulated
in the "Warranty Exclusions" described below.
However, if the Product is installed or integrated into the Buyer's equipment or machines, the Seller shall not reimburse
the cost of: removal or re-installation of the Product or other incidental costs related thereto, any lost opportunity, any
profit loss or other incidental or consequential losses or damages incurred by the Buyer or its customers.
The scope of our warranty for our products is limited to the range of our manufacture.
To Next Page
Loading...
Need help?
General
