Sumitomo Cyclo Drive 6000 User Manual

Cyclo Drive 6000
Getriebe und Getriebemotoren
Gearboxes and Gear Motors
Betriebsanleitung
Operating Manual
Nr. 991376
08/2019

Sumitomo Cyclo Drive 6000 Specifications

General

Brand	Sumitomo
Model	Cyclo Drive 6000
Category	Engine
Language	English

Summary

2. Safety notes

2.1 Intended use

Defines the intended industrial and commercial use of CYCLO gearboxes.

2.2 Safety instructions for use in an ATEX area

Safety guidelines for operating gearboxes in potentially explosive ATEX areas.

3. Notes on transport and storage

5. Installing the gearbox/ gear motor

5.3 Checks before starting installation

5.5 Check list for ATEX approved gears before commissioning

Checklist for ATEX approved gears prior to commissioning.

5.6 Tests before commissioning in Ex area

Tests to perform before commissioning gearboxes in Ex (explosive) areas.

5.7 Installation

Detailed instructions for the physical installation of the drive unit.

5.8 Other special provisions for ATEX:

6. Electrical installation

6.1 Safety notes

Essential safety precautions for electrical installation work.

6.3 Installing the motor

6.6 Electrical connection

6.7 Brake motors

Details on the circuit diagrams and connections for brake motors.

6.8 Checking for brake wear

6.9 Inverter operation

6.10 Motor protection

7. Commissioning the input drive

8. Lubrication notes

8.1 Lifetime grease lubrication

Description of lifetime grease lubrication for CYCLO Drive 6000 gearboxes.

8.1.2 Grease lubrication with top up

8.2 Oil lubrication

8.2.1 Type of oil lubrication

9. Inspection and maintenance work

9.1 Topping up grease lubricated gearboxes

9.2 Checking the oil level

9.4 Changing the oil

Detailed steps for draining and refilling the gearbox with new oil.

10. Notes on malfunctions