FC_GB_01_05 NO.991051 Issue: 01/05
Page 10
10.3 F1C-A mounting examples
Pplease refer also to Precision Catalogue No. 991007.
10.5 F1C-A
for use in hazardeous environment
The
FINE CYCLO reduction assemblies F1C-A
fulfil the requirements of guideline 94/9EU, provided
installation is in accordance with the assembly tolerances and assembly methods shown at Tab. 1 and
Tab. 2, as well as safety instructions shown in chapter 6.6, 6.7 and 7.
FINE CYCLO Operating Manual
Customer’s Output Shaft
Fine Cyclo
Customer’s Casing
Motor Adaptor
Motor
Customer’s
Output Shaft
Fine Cyclo
Motor Adaptor/Customer’s Casing
Motor
To Next Page
Loading...