Summer Prodigy - Page 19

Pull the SHOULDER
portion of the seat belt
to make the LAP
portion of the seat belt
webbing snug.
Thread ONLY lap
portion only of seat
belt through Spool.
Thread BOTH lap
and shoulder portions
of seat belt through
Tension Sensor.
Pull on the
SHOULDER portion
of the vehicle belt to
remove excess slack.
Press the
button on the Control
Panel. The word
“Click” will light up.
Route the seat belt
through the belt path.
Buckle the seat belt.
Base Installation
36
37
Base Installation
pull snug!
pull snug!
thread
webbing!
thread
webbing!
5
click!
click!
NEXT
NEXT
3
2
4
8
6
7