Summer Prodigy - Page 24

Remove excess
slack in the webbing by
pulling the belt snug.
Insert SINGLE
piece of webbing
through the Spool.
Insert SINGLE
piece of webbing
through the Tension
Sensor.
Press the
button on the Control
Panel.
47
Base Installation
46
Base Installation
NEXT
click!
click!
NEXT
Press the
button on the Control
Panel. The word
“Click” will light up.
Route the seat belt
through the belt path.
Buckle the seat belt.
3
2
NEXT
4
6
5
7
NEXT
8
pull snug!
pull snug!