sumpple S631N - 4.7.3 System

To Next Page

To Previous Page

4.7.2 Auto Maintain

Auto Maintain provides an auto protection of hardware; Set a time such as 24:00; Then camera will auto

reboot; and refresh the hardware proformance.

4.7.3 System

Reboot Device: Camera will get reboot.

Restore factory settings: User can restore factory settings once forget password, settings..etc.

Upgrade Device Firmware: To upgrade or degrade the camera firmware.(The firmware needs to store in the

same camera you are viewing camera.)

Upgrade Device Web ui: To upgrade or degrade the camera web ui. (The firmware needs to store in the

same camera you are viewing camera.)