EasyManua.ls Logo

Sun Microsystems StorEdge3000 Series - Replacing the EMU Module; Removing an EMU Module

Sun Microsystems StorEdge3000 Series
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6-10 Sun StorEdge 3000 Family FRU Installation Guide May 2004
5. Power on both power supply modules of the array.
6.4 Replacing the EMU Module
Be sure to follow “Static Electricity Precautions” on page 1-5. The EMU module is
hot-swappable and can be replaced with the array powered on.
FIGURE 6-2 The EMU Module Partially Pulled out of the Chassis
6.4.1 Removing an EMU Module
1. With the power on, and turn the thumbscrews on the top and bottom of an EMU
module counterclockwise until the thumbscrews are disengaged from the chassis.
2. Hold the thumbscrews, and pull out the EMU module.

Table of Contents

Other manuals for Sun Microsystems StorEdge3000 Series

Related product manuals