23
EIDE
The EIDE diagnostic validates both the EIDE chip and the IDE bus subsystem.
CODE EXAMPLE 15 identifies the EIDE output message.
SPEED=’299.80 MHz’
PASSES=’1 ‘
MESSAGE=’Error: External Audio Test not run: Please set the mfg-
mode to sys-ext.’
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===>
CODE EXAMPLE 15 EIDE Output Message
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===> 11
TEST=’ide_test’
SUBTEST=’probe-cmd-device’
SUBTEST=’hd-and-cd-check’
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===>
CODE EXAMPLE 14 Audio Output Message (Continued)
To Next Page
Loading...
Need help?
General
