24 Sun Ultra 5/10 Product Notes • April 1998
Video
The video diagnostic validates the UPA graphics.
CODE EXAMPLE 16 identifies the video output message.
All Above
The all above diagnostic validates the system unit.
CODE EXAMPLE 17 identifies the all above output message.
Note – The all above diagnostic will stall if the TIP line is installed on serial port A
or serial port B.
CODE EXAMPLE 16 Video Output Message
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===> 12
TEST=’video_test’
Please connect the monitor and use ttya/ttyb when running this test
if you are using the screen it may be become unreadable
SUBTEST=’mach64-chip-id-vendor-id-check’
SUBTEST=’video-frame-buffer-test’
SUBTEST=’mach64-walk-one-test’
SUBTEST=’mach64-walk-zero-test’
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===>
CODE EXAMPLE 17 All Above Output Message
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===> 13
TEST=’all_pci/cheerio_test’
SUBTEST=’vendor_id_test’
SUBTEST=’device_id_test’
SUBTEST=’mixmode_read’
SUBTEST=’e2_class_test’
SUBTEST=’status_reg_walk1’
SUBTEST=’line_size_walk1’
SUBTEST=’latency_walk1’
SUBTEST=’line_walk1’
To Next Page
Loading...
