19. Making a second coffee straight after
texturing milk
- Press either the 1 CUP, 2 CUP or STEAM
button (all buttons will illuminate).
• Place a cup
under the steam
wand.
• Turn the dial to the HOT WATER position.
• Leave on until hot
water comes out.
• Return dial to OFF position.
• The coffee machine is now ready for use.
20. Wash parts
• Wash parts with warm water.
21. Drip tray clean up
• Check if drip tray needs emptying.
• Empty water from drip tray and wash in
warm soapy water.
Important: To make coffee again
immediately after texturing milk, the
thermoblock must be cooled by following
these steps:
14
Making your first café style coffee
To Next Page
Loading...
