SunBeat 5010A - Display Status and Error Codes

28
4.5 Display status
After the equipment is running normally, the screen will show the corresponding status, and the display status is
described in the following table.
NO.
Status
Description
1
When power on, the software version number is
displayed, including the main control software version and
the display software version.
2
:KHQWKHGHYLFHLVFKDUJLQJWKHŗ&KDUJLQJŘLFRQOLJKWV
up.
3
When the device is discharging, the "Discharging" icon
lights up.
4
If a fault occurs during the system operation, an "Error xx"
alert will pop up, and the fault can be checked according to
the fault list.
5
Low battery warning
The idle display screen will go blank after 10 minutes. At this time, press the "LAMP" button on the right side
of the cabinet to wake up the display again.