SunBeat 5010A - Safety Instructions; Safety Precautions; Symbol Interpretation

2
1. Safety Instructions
Before installing, using and servicing the product, users must read the manual carefully and follow the safety
precautions required in the manual. The safety precautions mentioned in this manual are only to supplement the
local safety regulations.
1.1 Safety Precautions
1. The product must be installed and maintained by professionals in accordance with local standards and
regulations, and in strict accordance with the manual installation steps.
2. Before installation and maintenance, make sure that the power supply is off to prevent electric shock or fire.
3. During normal operation, it is strictly prohibited to directly touch the output and input terminals to avoid the
risk of electric shock.
4. During normal operation, do not directly open the machine casing, otherwise it may cause electric shock.
5. Keep the equipment away from flammable and explosive materials, and away from heat sources.
6. It is forbidden to modify the equipment by yourself to avoid serious accidents.
1.2 Symbol Interpretation
Note! Failure to operate as required may result
in moderate or minor injury to the person and
damage to the product!
This equipment must not be disposed of with
other household waste and must be sent to an
appropriate facility for recycling and recycling!
Danger: Risk of high voltage, be careful of
electric shock!
Recyclable!
No smoking!
This face should not be tilted upside down!
Do not step on!
Please read the manual carefully before use!
The air outlet of the device is hot and carefully
touched!
Protective grounding!
Wait 5 minutes after power off to ensure the
machine is fully discharged!
Grounding general identification!