-11-
8.3.2 Call Num: the phone numbers of destination.
You could set the Call Num as the following formats:
(1) The complete number, e.g. 0911111111
(2)
*, this means to transfer via 2-stage-dialing. The call will be
answered with a prompt dial tone for the caller to press the destination
phone numbers, e.g. 0911111111
(3)
#, this allow the caller with lan phone dial directly the destination
numbers.
Precondition:
(1)
SC-375 and incoming lan Phone are both registered at proxy
server or Asterisk.
(2) Proxy server/asterisk has set the routing rules to assign
specific prefix of numbers to be transferred from
SC-375.
(3) Lan to Mobile routing sets: *, #
Usage: You could dial on your lan phone call any destination
number with prefix of “09”. When your lan phone and
SC-375 had registered and “09” prefix is setted the routing
rules at proxy server or Asterisk.
(4)
#['d'n]['a'ppp], this means to do the above routing, and to modify
the numbers.
Note: 'd'n means to delete the number of prefix,
'a'ppp means to add 'ppp' prefix.
E.g. #d2a09 means to call the registered numbers via
one-stage-dialing. The numbers are modified to: delete 2 digits of
prefix of the original numbers, then add 09 to be new prefix of the
destination numbers.
To Next Page
Loading...