Instruction of SR81 Split Pressurized Solar Hot Water System
Page 21 of 59
Tank temperature (T3)
2
o
C higher than the
preset switch-off DHW
circuit temperature.
Switch-on temperature
or running time
Switch-off temperature
or stop time
Switch-on time for the
first time section
Switch-off time for the
first time section
Switch-on time for the
second time section
Switch-off time for the
second time section
Switch-on time for the
third time section
Switch-off time for the
third time section
Function setup: (take temperature controlled DHW as example)
►Select main menu CIRC DHW circuit function
►Press “SET” button, “TCYC” displays on the screen.
►Press “SET” again, “TCYC OFF” displays on the screen
►Press “SET”, “OFF” blinks
►Press “+/-” button to activate this function
► Press “SET” or “ESC” button to save the setting
►Press “+” button, “TEMP OFF” displays on the screen (temperature control Mode)
►Press “SET”, “OFF” blinks
►Press “+/-” button to activate this function
►Press “SET” or “ESC” button to save the setting.