User Manual 6 Electrical Connection
29
DC cable
AC cable
Grounding cable
Step 2 Insert the stripped DC cable into the "24V IN" and "24V OUT" ports of the
Logger1000. Connect the DC cable led from the "24V OUT" port of the
Logger1000 to other devices that need 24V DC power supply.
Step 3 Connect the stripped grounding cable to the corresponding port of the
Logger1000.
Step 4 Connect the DC cable led from the "24V IN" port of the Logger1000 to the
"DC 24V OUT" port of the power box. Connect the stripped AC cable to the
"AC (100~277V)" port of the power box, and connect the other end of the AC
cable to the 220V AC power.
To Next Page
Loading...
