8 Web Interface User Manual
46
System upgrade
Users can upgrade Logger1000 on the Web interface.
Click "System upgrade", select the upgrade file, and click "Upgrade".
The upgrade file should be in the ".zip" format.
Log export
Click the button "Log export", select the type of logs to be exported, and click
"Confirm".
Rebooting
Click "Rebooting" to enter the corresponding interface. A warning window will pop
up, and click "Confirm" to continue the rebooting operation.
Modification of the configuration parameters (port parameters and
transfer configuration) of the Logger1000 will not take effect before the
system is rebooted.
Restore factory setting
Click "Reset all settings" to enter the corresponding interface.
Restoring the factory settings refers to restoring all modified settings to the factory
state and will not clear the data.
Clear data
Click "Erase device data" to enter the corresponding interface.
To Next Page
Loading...
