User Manual 11 Appendix
71
SUNGROW shall hold no liability if otherwise.
Conditions
The replaced failure product needs to be disposed of by SUNGROW.
The client needs to reserve enough troubleshooting time for SUNGROW.
Exclusion of Liability
The following cases shall void the warranty claims of SUNGROW.
The free warranty periods for the whole machine/components have expired
The device is damaged during transport
The device is installed, altered, or operated incorrectly
The device operates in an environment harsher than that described in this
manual
The fault or damage is caused due to installation, maintenance, alteration, or
disassembly performed by persons not from SUNGROW
The fault or damage caused by using non-standard components or software or
using components or software not from SUNGROW
The installation and use do not comply with stipulations of relevant international
standards
The damage is caused by unpredictable factors
For the foregoing faults or damages, SUNGROW can provide a paid service at the
request of the client after judgment.
The dimensions and parameters of the device are subject to changes
without notification, and reference can be made to the latest document.
Software licenses
It is prohibited to use data contained in firmware or software developed by
SUNGROW, in part or in full, for commercial purposes by any means.
It is prohibited to perform reverse engineering, cracking, or any other operations
that compromise the original program design of the software developed by
SUNGROW.
To Next Page
Loading...
Need help?
General
