11
• Store the product in a clean and dry place with fine ventilation to prevent dust and water
vapor from eroding.
• Do not store the product in places with corrosive substances or susceptible to rodents
and insects.
• Carry out periodic inspections. Inspection shall be conducted at least once every six
months. If any insect or rodent bites are found, replace the packaging materials in time.
• If the product has been stored for more than a year, inspection and testing by profes-
sionals are required before it can be put into operation.
Please store the product according to the storage requirements. Product damage
caused by failure to meet the storage requirements is not covered by the warranty.
User Manual 3 Unpacking and Storage
To Next Page
Loading...
