Sunnect AP501 - Intruder Alarm Management; Activating the Intruder Alarm; Deactivating the Intruder Alarm

~ Intruder Alarm
A forced entry , opening the door wh i le the door lock is locked , wi ll set off the
intruder alarm . Once the intruder alarm is set off , you can stop the alarm by
entering a valid passcode or touch i ng a registered Tag Key to the Tag Key
sensor .
You can activate or deactivate this intruder alarm function using the fo ll owing
procedure.
a Activating the Intruder Alarm
1. Press the OPEN/CLOSE Button for 5 seconds (2 Beeps).
2. Press '9 ' on the Keypad.
3. Press'*' (3 Beeps).
~ Deactivating the Intruder Alann
1. Press the OPEN/CLOSE Button for 5 seconds (2 Beeps) .
2. Press '0' on the Keypad .
3. Press '*' (3 Beeps).
17