USAGE & MAINTENANCE
The SF-B1421 Indoor Cycling Bike is designed to help compensate for uneven surfaces
by providing the option to level the bike! To do so, simply turn the End Caps (No. 28),
located on the Rear Stabilizer (No. 29), until the bike becomes level with the ground.
This bike allows you to adjust the height and distance of the saddle within a few steps.
Loosen and pull out the Adjustment Knob (No. 13) to adjust the height of the saddle to
the desired level. You may also slide the seat forwards or backwards by loosening and
pulling out the adjustment knob under the Seat Slider (No. 16). You will see limit
identification on the saddle post, seat slider, and handlebar post, and this is to indicate
that there is no more space for adjustments – do not pass this mark. Always check the
Adjustment Knobs (No. 13) to ensure that they are in place and fully secure when you
finish making an adjustment.
Rotate the tension control knob clockwise to increase the level of resistance and rotate
the knob counter-clockwise to decrease the level of resistance. Push down on the
tension control knob to enforce the brake and stop the bike immediately.
To Next Page
Loading...
