Sunrise spas Spas User Manual

SPA OWNER’S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
PART A – GENERAL MANUAL
(APPLIES TO ALL SPAS)
INSTALLATION AND ELECTRICAL CONNECTION
START UP AND OPERATION
MAINTENANCE
Read in conjunction with Part B – brand specific manual
to form a complete Owner’s Manual
O1M-A

Sunrise spas Spas Specifications

General

Brand	Sunrise spas
Model	Spas
Category	Hot Tub
Language	English

Summary

Congratulations on the Purchase of Your New Spa

Safety Sign

Details regarding the important safety sign to be installed.

Important Safety Instructions

Warnings

Crucial warnings to reduce the risk of injury during spa use.

Installation Instructions

What's Under Your Spa (The Equipment)

2-Speed Jet Pump

Explanation of the 2-speed jet pump's function and operation.

Start-Up

How Your Spa Works

Overview of the spa's operational systems like circulation and heating.

Filling Your Spa

Maintenance

Filter System

Troubleshooting Your Spa

Common Problems And How To Solve Them

A guide to identifying and resolving common spa issues.

No Heat Or Heat Too Low

Troubleshooting steps for issues related to spa heating.

Jet(s) Do Not Come On When Pump Key Is Pressed

Diagnosing why jets are not activating when the pump is on.

Water Treatment Guide

Sanitizing Your Spa

Water Balance

pH

Electrical Connection

Electrical Connection – General Information

230 Volt Supply Connection

Read And Follow All Directions

Essential safety and installation directions for 230V connections.

Typical North American GFCI

Wire Size And Over Current Protection (Canada/US)

Your Filter – Removal & Replacement

Fill It Up!

Priming Mode – M019*

Procedure for entering and exiting spa priming mode.

Priming the Pumps

Detailed steps for priming the spa pumps correctly.

Temperature and Temp Range

Adjusting the Set Temperature

Instructions on how to adjust the spa's set temperature.

Mode – Ready and Rest

Adjusting Filtration

Main Filtration

Setting up the primary filtration cycles for the spa.

Preferences

Utilities – GFCI Test Feature

Forcing the GFCI Trip Test (North America Only)

Procedure to manually initiate the GFCI trip test.

Heater-Related Messages

Warning! Qualified Technician Required for Service and Installation