7
Remove the
the and repeat the process for
the right side.
Roller Bar
Arm
Flat-head
House
Height
38.
the Roller Bar. Slide the Awning Rail onto the Fabric
from either end, with the Flat Side of the Rail toward
the House. See .
Flat Side of
Awning Rail
Toward
House
Slide Rail
. Be sure they are locked in
place so that the total length between the Roller Bar
.
Ground
Bracket
40.
allow the Roller to lean against the house.
See .
Away From
House
Fasten the Awning Rail to the wall, or to the
42. Align the hole in the Upper Bracket with the single
See .
Upper Bracket
Bolt
Rail
To Next Page
Loading...
