5
wall at the predetermined height, aligning the upper
edge of the Board with the chalk line.
With the Board fastened to the wall at both
Remove the Board from the wall.
the wall.
For
(
end.
for Upper Bracket (Single
of Awning Rail.
Le Side
Right Side
Snap a straight line with a chalk line or string,
edge.
Align the top edge of the Awning Rail with the
snapped line on the board. See .
of the Awning Rail, into the Board (
Board with one short Awning Rail Screw in the end
hole.
Using the Awning Rail as a template, align it with
the line on the board.
.
Place an Upper Bracket on the end of the
Awning Rail, aligning the Top Hole of the Bracket with
Remove the Awning Rail from the Board.
.
Le Side
Right Side
for Upper Bracket (Single
of Awning Rail.
To Next Page
Loading...
