28. Using a chalk line or a string, snap a level line the
siding edge as the reference line if the siding is level.
For
Using the Awning Rail as a template, align the
upper edge of the Awning Rail with the Siding edge or
chalk line, and at both ends and in
the middle of the Awning Rail.
Screws provided, temporarily install one screw in
the middle and one on each end of the Awning Rail.
Rail is aligned with the chalk line.
procedure for the other side.
Remove the Awning Rail from the house and drill
For and
. For other
from the top edge (
Snap a straight line with a chalk line or string, the
Align the top edge of the Awning Rail with the
line on the board (See
of the Awning Rail, into the board (
Temporarily fasten the Awning Rail to the board
Using the Awning Rail as a template, align it with
side. See .
Using a
in the wall. See .
To Next Page
Loading...
Need help?
General
