SunStar SPS/D(C)-B1202-02 User Manual

15
5) Change of parameters according to setting of thread wiper specifications
·Parameters are changed according to mechanical thread wiper specifications upon initialization.
·For change of parameters according to setting of thread wiper specifications, refer to the following
table :
·For more information, refer to “Memory Switch Function Table”.
Mechanical Type
Electronic Type
Function No.
Wiper Specification
0
1
A14 A31
1
0

SunStar SPS/D(C)-B1202-02 Specifications

General

Brand	SunStar
Model	SPS/D(C)-B1202-02
Category	Sewing Machine
Language	English