109
Use the frame transfer
key to setup X:600, Y:1500. Then
Press
=== MIDDLE OFFSET ===
=> FRAME MOVE
=== OFFSET POINT ===
=> FRAME MOVE
Use the frame transfer key
to setup X:800, Y:2000. Then Press
NEEDLE BAR SELECTION
Press when the operating system loads and is on the screen. The following screen appears:
==== NEEDLE SELECT ====
[1 ]: 1 / 1
[END] [INSERT] [DEL]
NOTICE
The set-up of the needle bar determines the automatic color changing functions
and the needle bar changing order. The needle bar changing order (color
changes) can be set from 1-99. When setting the needle bars, if you press (0) the
setting of that needle will be deleted.
To Next Page
Loading...
