111
Press and 1 to input 11.
==== NEEDLE SELECT ====
[12AoB ]: 5 / 5
[END] [INSERT] [DEL]
Press and 2 to input 12.
==== NEEDLE SELECT ====
[12AoBC ]: 6 / 6
[END] [INSERT] [DEL]
Press to end the setup
Move the cursor to “END” and
press to end the setup.
==== NEEDLE SELECT ====
[12AoBC ]: 6 / 6
[END] [INSERT] [DEL]
The cursor has been moved to [END],
[INSERT], and [DEL].
NOTICE
Press to change the needle bar after it is selected.
To change needle bar, press 5
Press
Restart operation.
It moves to #5 needle bar.
SWF embroidery machines have short cuts that allow easy changes.
LESSON: If the order of the needle bars is set as 1-2-3-4 and you want to set the 3 to # 5needle bar, follow
these directions:
As seen in these directions, you can easily change the
needle bar setting from “1-2-3-4” to “1-2-5-4”.
To Next Page
Loading...
