SunStar SWF/B-T1201C - TAPE READER AND COMMUNICATION ERRORS; MEMORY AND SYSTEM INSTALLATION ERRORS

112
LESSON: By using the functions INSERT and DEL(ETE) you can change the order of the needle bars from
1-2-10-OFFSET-11-12 to 1-2-3-10-11-12.
Press when the menu
Screen shows the beginning
embroidery data.
==== NEEDLE SELECT ====
[12AoBC ]: 1 / 6
[END] [INSERT] [DEL]
Place the cursor at A to insert 3
between 2 and A.
==== NEEDLE SELECT ====
[12AoBC ]: 3 / 6
[END] [INSERT] [DEL]
Press
==== NEEDLE SELECT ====
[12AoBC ]: 3 / 6
[END] [INSERT] [DEL]
Move the cursor to [INSERT]
==== NEEDLE SELECT ====
[12AoBC ]: 3 / 6
[END] [INSERT] [DEL]
==== NEEDLE SELECT ====
[123AoBC ]: 3 / 7
[END] [INSERT] [DEL]
Press