SunStar SWF/B-T1201C - CHAPTER 12 THE CONTROL BOX; FUSE LOCATION ON 110 V POWER BOARD

113
Move the cursor to “0” to delete
the offset between A and B
==== NEEDLE SELECT ====
[123AoBC ]: 3 / 7
[END] [INSERT] [DEL]
Press
==== NEEDLE SELECT ====
[123AoBC ]: 3 / 7
[END] [INSERT] [DEL]
Move the cursor to [DEL] to delete
==== NEEDLE SELECT ====
[123AoBC ]: 3 / 7
[END] [INSERT] [DEL]
Press to delete
==== NEEDLE SELECT ====
[123ABC ]: 3 / 6
[END] [INSERT] [DEL]
To end correcting the needle
bar order, Press
Move the cursor to [END] and
Press
==== NEEDLE SELECT ====
[123ABC ]: 3 / 6
[END] [INSERT] [DEL]
3 is inserted between 2 and A.