To Next PageTo Next Page
Need help?Do you have a question about the SunSynk Hybrid Parity Inverter and is the answer not in the manual?
General| Max PV Voltage | 500V |
|---|---|
| Battery Voltage | 48V |
| Max PV Input | 6500W |
| Max Charging Current | 100A |
| Max Discharging Current | 100A |
| Battery Compatibility | Lithium / Lead Acid |
| Communication | CAN/RS485 |
Crucial safety advice for installation and operation of the inverter unit.
Identifies key components of the Sunsynk Hybrid Parity Inverter.
Lists the primary capabilities and benefits of the inverter.
Details battery specifications and AC output capabilities.
Covers PV input parameters and protection features.
Specifies ideal placement and clearance for the inverter.
Lists locations and environments to avoid for installation.
Step-by-step guide for securely mounting the inverter.
Ambient temperature and clearance needed for optimal operation.
Essential DC over-current protector and cable size recommendations.
Instructions for correct wiring and polarity to prevent damage.
Illustrates the use of a fuse and DC isolator for battery connection.
Illustrates the AC connection to the inverter and grid.
Clarifies the function of GEN, LOAD, and GRID terminals.
Details the circuit for an AC surge protector.
Explains the role of the CT coil in sensing export power.
Guides on proper installation and polarity to ensure accurate readings.
Details the use of MPPT controllers for PV panel connection.
Emphasizes safety measures and voltage considerations for PV connection.
Explains the LCD display, LED indicators, and function keys.
Instructions for turning the inverter unit on and off.
Details the data shown on the inverter's home screen.
Explains how to navigate from the home page to other sections.
Explains the information presented on the inverter's status page.
Guides on how to navigate to various setup configurations.
Details settings for display brightness, auto-dim, and audible alerts.
Instructions for setting the year, month, day, hour, minute, and second.
Explains the concept and benefits of power shaving.
Details how to perform a full factory reset on the inverter.
Explains how to set or change the lock code for security.
Steps to set up multiple inverters in a master/slave configuration.
Configuration options for battery capacity, charge, and discharge.
Settings for charging the battery from generator or grid sources.
Configures shutdown, low battery warnings, and restart voltages.
In-depth explanation of BULK, ABSORPTION, FLOAT, and EQUALISATION stages.
Guides on configuring the smart load feature for excess power usage.
Details how to set up and profile wind turbine inputs for the inverter.
Sets schedules for battery charging and discharging.
Configures reconnect time, power factor, and Gen-to-grid connection.
Configures grid frequency, voltage, and phase type.
Accesses daily, monthly, and yearly solar production data.
Displays cumulative solar power produced over years and totals.
Displays cumulative grid power usage and generation monthly.
Shows cumulative grid power data for years and overall totals.
Lists various alarm codes and their occurrence times.
Details the configuration for power saving in on-grid mode without PV.
Configuration for charging battery with excess solar power.
Configuration for providing backup power during grid failures.
Setup for remote locations without grid connection, using solar.
Configuration for off-grid use with smart load functionality.
Setup for off-grid systems utilizing a generator for power.
Details the circuit design for an automatic generator start system.
Wiring diagram for a 24KW 3-phase system with multiple inverters.
Illustrates the setup for an 80KW system using 10 parallel inverters.
Quick guide to operating the inverter's LCD screen and menus.
Details on brightness, auto-dim, beep, time, peak shaving, and reset.
Explains settings for capacity, charge/discharge currents, TEMPCO, and BMS.
Configures battery charging from generator or grid sources.
Sets shutdown, low battery, and restart voltage levels.
In-depth explanation of BULK, ABSORPTION, FLOAT, and EQUALISATION stages.
Details how the smart load feature works and its usage.
Explains the setup and profile for wind turbine inputs.
Configures time-based charging, power limiting, and grid interactions.
Settings for grid reconnect time, power factor, and GEN connection.
Specific grid settings for regions outside the USA.
A detailed list of fault codes and their corresponding instructions.
How to view daily, monthly, and yearly solar power production data.
How to view daily, monthly, and yearly grid power data.
Detailed breakdown of data shown on the inverter's status page.
