EasyManua.ls Logo

SunSynk SUNSYNK-5K-SG01LP1 - User Manual

SunSynk SUNSYNK-5K-SG01LP1
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
v.26 (04/27/23
USER MANUAL
SUNSYNK-3.6K-SG01LP1 / SUNSYNK-3.6K-SG03LP1 /
SUNSYNK-5K-SG01LP1 / SUNSYNK-5K-SG03LP1
Global Tech China Ltd, 3 Floor, Wai Yip Industrial Building.
171 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong.
Tel: +852 2884 4318 Fax: +8522884 4816
www.sunsynk.com / sales@sunsynk.com
SINGLE-PHASE
HYBRID INVERTER
PLEASE RETAIN FOR
FUTURE REFERENCE

Table of Contents

Other manuals for SunSynk SUNSYNK-5K-SG01LP1

Question and Answer IconNeed help?

Do you have a question about the SunSynk SUNSYNK-5K-SG01LP1 and is the answer not in the manual?

SunSynk SUNSYNK-5K-SG01LP1 Specifications

General IconGeneral
BrandSunSynk
ModelSUNSYNK-5K-SG01LP1
CategoryInverter
LanguageEnglish

Summary

USER MANUAL

SAFETY

General Safety

Guidelines for safe installation, operation, and maintenance of the inverter.

Safety Instructions and Disposal

Safety Instructions

Crucial safety precautions and warnings for handling the inverter and batteries.

PRODUCT INTRODUCTION

Product Features

Key interactive, compatible, configurable, and secure features of the inverter.

TECHNICAL SPECIFICATIONS

INSTALLATION

Mounting the Inverter

Step-by-step instructions for securely mounting the inverter onto a wall.

Battery Connection

Procedure and requirements for safely connecting the battery to the inverter.

DC Battery Protection

Recommended DC over-current protection and connection for lithium batteries.

Connecting a Lithium Battery

Steps and considerations for connecting and configuring a lithium battery.

Connecting the AC

Procedure for connecting the inverter to the AC grid and load, including breaker recommendations.

PV Connection

Guidelines for connecting PV modules, including selection, wiring, and protection.

PV Module Selection

Parameters for selecting appropriate PV modules for the inverter.

PV Module Wiring

Steps for correctly wiring PV modules to the inverter.

OPERATION

Battery Setup Configuration

Settings for battery capacity, charge/discharge amps, and battery type.

Generator & Battery Settings

Configuration options for generator start, battery charging, and island mode.

Battery Discharge Settings

Inverter shutdown settings based on battery SOC and voltage levels.

Lithium Battery Setup

Specific steps for setting up and configuring lithium-ion batteries.

Paralleling Inverter Settings

Advanced settings for configuring multiple inverters in parallel.

Operation Modes

Fault Codes

COMMISSIONING

Start-Up and Shutdown Procedures

Step-by-step procedures for powering the inverter system on and off.

Related product manuals