To Next PageTo Next Page
Need help?Do you have a question about the SunSynk SUNSYNK-8K-SG01LP1 and is the answer not in the manual?
General| Rated Power | 8000W |
|---|---|
| Max PV Input Power | 10400W |
| Max. DC Voltage | 500V |
| Max PV Input Voltage | 500V |
| MPPT Voltage Range | 125-425V |
| Number of MPPTs | 2 |
| Max AC Input Current | 35A |
| AC Output Frequency | 50/60Hz |
| Efficiency | 97.6% |
| Battery Voltage | 48V |
| Max. Charging Current | 190A |
| Max Discharging Current | 190A |
| Max Charging Current | 190A |
| Dimensions | 330 x 580 x 232 mm |
| Weight | 21.5kg |
| Communication | CAN/RS485 |
| Cooling | Fan Cooling |
| Max. Input Current | 22A (11A+11A) |
| Output Voltage | 230V |
| AC Output Voltage | 230VAC |
| Operating Temperature | -25°C to +60°C |
| Input Voltage Range | 120-450V |
Guidelines for safe installation, operation, maintenance, and essential safety instructions.
Instructions for environmentally safe product disposal.
Introduction to the inverter's functions, features, and basic system architecture.
Provides physical dimensions and mounting details of the inverter.
Lists all items included in the inverter package and preparation steps.
Guidelines for choosing a suitable location and mounting the inverter.
Instructions for connecting batteries, sensors, and related configurations.
Guidance on connecting the inverter to the AC grid and PV modules.
Information on surge protectors, CT coils, earth connection, and generator.
Instructions for connecting meters and general wiring systems.
Diagrams for connecting generators and multiple inverters in parallel.
Procedure for turning the inverter on/off and navigating the UI.
Settings for time, system name, factory reset, and battery parameters.
Programming charge/discharge times and configuring grid parameters.
Settings for paralleling, DRMs, wind turbines, auxiliary loads, and monitoring.
Descriptions of the inverter's main operating modes.
Step-by-step guide for powering up, shutting down, and initial checks.
Details connection protocols and pin assignments for battery and inverter sides.
Notes on specific Australian standards for inverters.
Information on compatibility with the SolarMan app for data logging.
Guidelines for using Residual Current Devices (RCDs) with the inverter.
Instructions for setting up internet connectivity via data loggers.
