SINGLE PHASE HI 8kW | User Manual25
4.9. Installing the CT Coil
The CT coil is one of the most important parts of the Sunsynk Parity inverter. This device reduces the power
of the inverter to prevent feeding power to the grid. This feature is also known as “Zero Export”.
1. Fit the coil (sensor) around the live cable on the main fuse feeding the building and run the cable back
to the inverter. If using an external meter, you can extend the cable for more than 10 metres. Please
consult the meter manual on distance.
2. Connect the other end of the CT coil to the inverter terminals marked as CT coil.
To Next Page
Loading...
Need help?
General