To Next PageTo Next Page
Need help?Do you have a question about the SunSynk SUNSYNK-3.6K-SG01/03LP1 and is the answer not in the manual?
Essential safety guidelines for installation, operation, and maintenance.
Explanation of warning symbols and proper disposal of electronic waste.
Introduction to the hybrid parity inverter and its key features.
Visual representation of the inverter's electrical connections and system flow.
Guidance on choosing a suitable location and mounting the inverter safely.
Instructions for connecting different types of batteries to the inverter.
Procedures for connecting AC power and CT coils for export control.
Mandatory steps for proper grounding to ensure electrical safety.
Guidelines for selecting and wiring PV modules to the inverter.
Overview of the inverter's LCD display and monitoring functions.
How to switch the inverter on/off and adjust fundamental settings.
Detailed steps for configuring system parameters, battery, and reset options.
Settings related to grid voltage, frequency, and power factor management.
Configuration for parallel operation, wind turbines, auxiliary loads, and peak shaving.
List of error codes and guidance for diagnosing and resolving issues.
Step-by-step guide for safely powering the inverter on and off.
Key checks and information required before and during inverter setup.
Understanding and addressing Ground Fault Detection Impedance (GDFI) errors.
Recommendations for regular cleaning and system checks for optimal performance.
General| Model | SUNSYNK-3.6K-SG01/03LP1 |
|---|---|
| Type | Hybrid Inverter |
| Rated Power | 3.6 kW |
| Number of MPPT | 2 |
| Number of MPPTs | 2 |
| Efficiency | 97.5% |
| Battery Voltage | 48 V |
| Max. AC Output Power | 3.6 kW |
| Rated Grid Voltage | 230 V |
| Operating Temperature | -25 °C to 60 °C |
| Protection Level | IP65 |
| Battery Compatibility | Lithium, Lead-Acid |
| Grid Frequency | 50 Hz |
| Communication | RS485 |
