SunSynk SUN-3.6K-SG01/03LP1-EU User Manual

Hybrid Parity (Super) Inverter
INSTALLER MANUAL
3.6kW/5.5kW/8.8kW PLUS PARALLEL VERSION
Global Tech China Ltd, 3 Floor, Wai Yip Industrial Building.171 Wai Yip Street,
Kwun Tong, Kowloon, Hong Kong.
Tel: +852 2884 4318 Fax: +8522884 4816
www.sunsynk.com / sales@globaltech-china.com / www.globaltechhk.com

SunSynk SUN-3.6K-SG01/03LP1-EU Specifications

General

Model	SUN-3.6K-SG01/03LP1-EU
Type	Hybrid Inverter
Rated Power	3.6 kW
Max. DC Voltage	500V
Number of MPPTs	2
Max. Input Current per MPPT	11 A
Max. Output Current	16 A
Nominal AC Voltage	230 V
AC Output Voltage	230 V
Max Efficiency	97.6%
Battery Voltage	48 V
Protection Class	IP65
Operating Temperature Range	-25 °C to +60 °C
AC Output Frequency	50 Hz
MPPT Efficiency	99%
Communication	RS485, Wi-Fi

Summary

1. SAFETY

1.1. System Overview

Provides a general understanding of the inverter's features and capabilities.

2. TECHNICAL SPECIFICATION

2.1. System Diagram

Illustrates the circuit block diagram and efficiency curve of the inverter.

3. INSTALLATION

3.1. Selecting the Mounting Area

Guidelines for choosing a suitable location for mounting the inverter.

3.2. Mounting the Inverter

Instructions for physically mounting the inverter onto a wall or suitable surface.

3.3. Battery Connection

Details on how to connect the battery to the inverter models.

3.4. AC Connection – Single Inverter or Multi Inverter System

Procedures for connecting the inverter to AC power, for single or multiple units.

3.5. Installing the CT Coil

Guide for installing the Current Transformer coil for export limitation.

3.6. Connecting the PV

Instructions on how to connect photovoltaic (PV) modules to the inverter.

4. OPERATION

4.1. Display

Explains the inverter's LED indicators and function key operations.

4.2. Switching ON/OFF

Procedure for turning the inverter system on and off.

4.3. Home Page

Details on navigating and understanding the inverter's home screen interface.

4.4. Status Page

Displays real-time operational data like power, voltage, current, and battery status.

4.5. System Flow Page

Visualizes the power flow within the system from various sources to loads.

4.6. Setup Page

Access point for configuring various system parameters and settings.

4.7. Set Time (Clock)

Instructions for setting the inverter's internal clock and date.

4.8. Set Company Name / Beeper / Auto dim

Customization options for company name, audible alerts, and display brightness.

4.9. Factory Reset and Lock Code

Procedures for resetting the inverter to factory defaults and managing access codes.

4.10. Battery Setup Home Page

Configuration screen for battery type, capacity, and charging parameters.

4.11. Generator and Battery Page

Settings for generator input and detailed battery charging configurations.

4.12. Battery Discharge Page

Configuration of inverter shutdown voltage and low battery warnings.

4.13. Setting Up a Lithium Battery

Specific steps for configuring lithium battery parameters and communication.

4.14. Program Charge / Discharge Times Page

Schedule charge and discharge times for the battery system.

4.15. Grid Supply Voltage and Frequency - Grid Supply Page

Settings for grid voltage, frequency, and reconnection parameters.

4.16. Advanced Settings for Paralleling Inverters

Configuration for connecting multiple inverters in parallel for increased power.

4.17. Solar Power Generated

Displays daily, monthly, yearly, and total solar power production data.

4.18. Grid Power

Shows daily, monthly, yearly, and total grid power import or export.

4.19. Advanced Settings for Wind Turbine

Configuration options for connecting and managing wind turbine inputs.

4.20. Advanced Settings for Auxiliary Load

Setup for auxiliary loads, such as water heaters, based on battery status.

4.21. Advanced Settings for Peak Power Shaving

Configuration for reducing power consumption during peak demand periods.

4.22. Fault Codes

Lists and explains various fault codes and their potential solutions.