To Next PageTo Next Page
Need help?Do you have a question about the SunSynk 8K-SG01LP1 and is the answer not in the manual?
General| Model | 8K-SG01LP1 |
|---|---|
| Rated Power | 8000 W |
| Max PV Input Power | 10400 W |
| Max DC Power | 10400 W |
| Max PV Input Voltage | 500 V |
| Number of MPPTs | 2 |
| Rated AC Output Power | 8000 W |
| AC Frequency | 50/60 Hz |
| Peak Efficiency | 98.4% |
| Battery Voltage | 48 V |
| Max. Charging Current (AC) | 120 A |
| Operating Temperature Range | -25°C to 60°C |
| MPPT Range | 125 V - 425 V |
| Max AC Output Power | 8800W |
| Nominal AC Voltage | 230 V |
| Efficiency | 97.6% |
| Communication | RS485 |
Details essential safety measures for installation and operation, like grounding, circuit breakers, and waiting periods.
Explains how to connect the batteries for both 3.6/5.5kW and 8kW models.
Step-by-step guide for connecting a lithium battery, including surge protector recommendations.
Provides instructions and notes for connecting the AC power to the inverter.
Explains the installation and function of the CT coil for zero export.
Details the mandatory earth connection procedure for safety.
Guides on connecting PV modules, including model-specific MPPT configurations.
Explains how to perform factory resets and manage lock codes.
Specific steps for configuring lithium battery parameters and communication protocols.
Configuration for master/slave setup, Modbus SN, and phase for parallel operation.
Lists and explains various error codes and their solutions.
Step-by-step guide for powering the inverter on and off safely.
