Connecting the DRM’S
This can be selected under advance settings.
Plug the LAN cable into the socket marked DRMS
4.16. Advanced Settings for Paralleling Inverters
To configure multi-inverter settings click on the “Advance” icon.
What this page displays:
If the inverter operates as a master or a
slave.
Modbus Device ID, which must be unique for
each inverter connected to the bus/wire.
What you can do from this page:
Set the inverter as a master or slave per
bus/wire.
Set the phase in which the inverter will be
paralleled.
Set the Modbus SN for paralleling.
To Next Page
Loading...
Need help?
General