To Next PageTo Next Page
Need help?Do you have a question about the SunSynk Hybrid Parity and is the answer not in the manual?
General| Category | Inverter |
|---|---|
| Type | Hybrid |
| Battery Voltage | 48V |
| Max PV Input | 6.5kW |
| Max PV Open Circuit Voltage | 500V |
| MPPT Range | 120-450V |
| Output Frequency | 50/60Hz |
| Output Voltage | 230V |
| Communication | RS485 |
| Model | Sun Synk Hybrid Parity 5kW |
Provides an overview of the inverter's features and capabilities.
Illustrates the overall system architecture and component connections.
Guidelines for choosing a suitable location to install the inverter.
Instructions on how to physically mount the inverter unit.
Details on how to connect the battery to the inverter.
Instructions for connecting the AC power source and output.
Steps for connecting the photovoltaic (PV) modules.
Explains the inverter's LED indicators and display elements.
Procedure for turning the inverter system on and off.
Describes the main screen and its accessible information.
Details the various parameters displayed on the status screen.
Visualizes the energy flow within the system.
Overview of the system setup options and navigation.
Instructions for setting the inverter's internal clock.
How to configure company name, beeper, and display dimming.
Procedures for factory reset and setting lock codes.
Initial setup for battery parameters and types.
Configuration for battery charging and generator input.
Setting up low battery warnings and shutdown voltages.
Detailed steps for configuring lithium battery parameters.
Programming charge and discharge schedules for batteries.
Configuring grid voltage and frequency settings for compliance.
Configuration for connecting multiple inverters in parallel.
Displays daily, monthly, yearly, and total solar power generation.
Shows daily, monthly, yearly, and total grid power export/consumption.
Settings for integrating a wind turbine as a power source.
Configuration for auxiliary loads or smart load functions.
Settings for reducing peak power consumption from the grid.
Lists and explains various error codes and their solutions.
Step-by-step guide for powering the inverter on and off.
Key checks and information required for successful commissioning.
Details the Ground Fault Detection Interrupter (GFDI) fault.
