Recommended DC Surge Protector:
3.3.1 Connecting a Lithium Battery
When connecting a Lithium battery, follow the connection steps bellow and then check section 4.13
“Setting Up a Lithium Battery” for setting it up in the inverter:
1. Connect a properly power cable following the battery manufacturer specification and recommend
safety devices.
2. Connect communication cable properly following the battery manufacturer specification.
3. Connect to the inverter correctly.
Before making the final DC connection or closing the DC breaker/disconnection device, ensure
that the inverter is wired properly. Reverse polarity connection on the battery will damage the
inverter.
To Next Page
Loading...
Need help?
General