SunSynk SUN-10K-SG04LP3 User Manual

v4 (04/27/21)
THREE
-
PHASE HYBRID
INVERTER
USER MANUAL
SUN-8K-SG04LP3 / SUN-10K-SG04LP3 / SUN-12K-SG04LP3
Global Tech China Ltd, 3 Floor, Wai Yip Industrial Building.
171 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong.
Tel: +852 2884 4318 Fax: +8522884 4816
www.sunsynk.com / sales@globaltech-china.com
www.globaltechhk.com
Version
7
.0 (0
7
/
27
/2021)

SunSynk SUN-10K-SG04LP3 Specifications

General

Brand	SunSynk
Model	SUN-10K-SG04LP3
Category	Inverter
Language	English

Summary

1. Safety

1.1. General Safety Information

Information on safe usage, compliance with regulations, and qualified personnel.

1.2. Symbols

Explanation of warning, caution, and notice symbols used in the manual.

1.3. Safety Instructions

Crucial safety guidelines for installation, operation, and maintenance.

2. Product Introduction

2.3. Features

3. Technical Specifications

4. Installation

4.2. Selecting the Mounting Area

Guidelines for choosing a suitable mounting location, including clearance requirements.

4.3. Mounting the Inverter

Instructions and considerations for physically mounting the inverter.

4.4. Battery Connection

Procedures and specifications for safely connecting the battery to the inverter.

4.5. Connecting the AC and Backup Load Connection

Guidelines for connecting the AC power source, grid, and backup load.

4.6. Connecting the CT Coil

4.7. Earth Connection (Mandatory)

Essential steps for establishing a proper earth connection for safety.

4.8. PV Connection

Instructions for connecting PV panels, including circuit breakers and surge protection.

4.8.2. PV Module Wiring

Step-by-step guide for wiring PV modules to the inverter.

4.9. System Wiring for Inverter

4.10. Wiring Diagram

5. Operation

5.10. Battery Setup Page

Settings for battery capacity, charge/discharge current, and temperature.

5.11. Generator and Battery Page

5.12. Battery Discharge Page

5.13. Setting Up a Lithium Battery

Specific configuration steps for lithium-ion batteries and BMS communication.

5.14. Program Charge / Discharge Times

5.15. Grid Supply Voltage and Frequency – Grid Supply Page

Configuration of grid voltage and frequency settings for safe operation.

5.20. Advanced Settings for Auxiliary Load

5.22. Fault Codes

List of fault codes, their descriptions, and recommended solutions.

6. Comissioning

6.1. Startup / Shutdown Procedure

Step-by-step instructions for powering the inverter on and off correctly.

6.2. Information for Commissioning the Inverter