Page | 59
F28 DCIOver_M1_Fault F60 AC_W_GridCurr_High_Fault
F29 AC_AirSwitch_Fault F61 AC_A_InductCurr_High_Fault
F30 AC_MainContactor_Fault F62 AC_B_InductCurr_High_Fault
F31 AC_SlaveContactor_Fault F63 ARC_Fault
F32 DCIOver_M2_FaulT F64 Heatsink_HighTemp_Fault
If you need further help please refer to the Sunsynk website where you will find training
videos and frequently asked questions www.sunsynk.com.
5.23. Operation Modes
MODE I: Basic
The 3-Phase Hybrid Inverter is designed for grid-connected operation.
The inverters meet the main standards concerning safety and electromagnetic
compatibility. Before leaving the factory, all inverters undergo rigorous testing to
ensure the inverter can operate reliably as presented in Chapter 3 ‘Technical
Specifications’.
NOTICE
To Next Page
Loading...
Need help?
General