7
PIR Interval
Set the time of delay shooting when the camera detects amotion. In the selected time,
the camera will not record any image or video. it can avoid storing too many the same
events and waste of memory storage.
9 options: 1/5/10/15/30 seconds, 1/5/10/30 minutes.
PIR sensitivity
Set the sensitivity level of the PIR sensor.
3 options: low / Medium / High
Language
13 options: English/Frangais/Deutsch / Italiano /Espanol/ Portugues / Nederlands /
Danish / Hrvatski/Finnish / Swedish / Poland / Norwegian
Timelapse
If you choose time lapse mode, 4 options: 5/10/30 / 60 minutes.
Over write
2 options: Off / On
‘When your camera memory card is full, it will delete the first picture/video, then save a
new picture/video, so camera can take picture/video endlessly.
Date
Set the camera date& time, 3 options: YY/MM/DD , MM/DD/YY, DD/MM/YY
Camera Name.
6 letters or numbers, for example CAMO00OO
Timer
You can set the camera start and stop time, for example if you want camera just work at
night, you can set 18:00:00 to 6:00:00
To Next Page
Loading...
