6
System Setup
Switch Mode Button to “Test”, then you can set the system parameters.
1. Press Menu button to open the setup menu.
2. Press Up/Down button to scan all menus. Then press OK button to enter the options
interface.
3. Press Up/Down button to scan all options. And press OK button to confirm options.
4. Press Menu button again to turn back to last menu or exit the setup menu.
You can follow below instructions to setup the menus and functions:
Mode
Set the working mode, there are 4 modes:
Camera: camera take pictures only.
Video: camera takes videos only.
Camera &video: the camera will take a photo firstly, then take a video.
Resolution
Set the picture resolution, 3 options: 12MP/8MP/5MP
Continue Shot
4 options: 1/3/6/9 , for example, 3 means camera take 3 pictures if it is triggered one
time.
Video Size
You can choose the video resolution, 3 options: 1080P/720P/VGA.
Video Length
You can choose video length when camera take a video, 5 options: 10/20/30/60/90
seconds.
Record Audio
2 options: [On)/[Off], when you choose ON, when camera take a video, camera's
microphone will also record the audio.
To Next Page
Loading...
