9
Working Mode
Switch the Mode Button to “On”. camera has red flash for 5 seconds. then camera began
to work.
• If the wild animals enter the detection range of the motion sensors, the camera
will be activated and start to take pictures or videos.
• If the wild animals continue to move to the detection zone of the sensor, the
camera will take photos or record video automatically.
• When the wild animals leave the detection zone of the sensors, the camera will
be deactivated and turn back to standby mode.
Night Mode
In night mode, the pictures are white and black mode. When record a video for long
time in the evening, the low voltage may have a great influence on the stability of the
machine, thus do not record video with low voltage in the evening,
Connecting the Camcorder to a PC by the USB Cable
• Connect the camera to the computer via a USB cable. Tum on the camera, the
screen displays “Mass Storage”.
• Open [My Computer] or [Windows Explorer]. A "Removable Disk" appears in the
drive list. Double-click the "Removable Disk" icon to view the contents from the
camera.
Please notice - All products are subject to change without any notice. We take
reservations for errors and omissions in the manual.
To Next Page
Loading...
