Sunwave CrossFire M2 - Software Version Verification After Upgrade

MID POWER
4 x 37dBm Output
5G NR Compliant
© Sunwave CG_CF_M2 v2.1.0 | 46 of 47
Contact us today:
www.sunwave.com
cf_support@sunwave.com
5. Then go to Settings -> Overview to confirm that the software matches the version in the upgrade package as shown
in the red frame of Figure 56.
Figure 56. Software Version Check
Note: If the software version is not incompatible, please upgrade the same software again to make the upgrade
completed.