To Next PageTo Next Page
Need help?Do you have a question about the Superior Fireplaces WRE3042WS and is the answer not in the manual?
General| Material | Steel |
|---|---|
| Vent Type | Vent-Free |
| Fuel Type | Electric |
| Size | 42 inches |
| BTU | 4800 BTU |
| Width | 42 inches |
Lists the specific fireplace models covered by this manual.
General safety warnings and emergency procedures, including what to do if you smell gas.
Warnings about improper installation, using non-IHP parts, and general fire safety practices.
Precautions regarding fuel types, appliance temperature, unattended children, and supplemental heat use.
Details conditions that can cause fireplace overfiring and potential damage to the system.
Guidelines on proper fuel usage, starting fires, and the formation/removal of creosote.
Information on carbon monoxide poisoning, its symptoms, and affected individuals.
Discusses ventilation requirements and recommendations for installing smoke detectors.
Visual representation of fireplace dimensions and component placements for installation.
Guidelines for selecting a safe and efficient location for fireplace installation.
Specifies minimum clearance distances required from combustible materials.
Instructions and diagrams for framing the fireplace opening according to specifications.
Requirements and specifications for fabricating a hearth extension to protect floors.
Rules for placing mantels and other combustible materials near the fireplace opening.
Instructions for installing an optional outside air kit for combustion air.
Information on the chimney pipe system components and lineal gain for installation.
Step-by-step guide for assembling and installing the double wall chimney system sections.
Instructions for using offset elbows to navigate around obstructions, with an offset chart.
Illustrates various configurations of typical offset installations for chimney systems.
Guidance on installing ceiling support pipes, including strap placement and clearances.
Explains the purpose and installation of firestop spacers for chimney penetrations.
Detailed steps for safely penetrating the roof with the chimney system.
Instructions for installing roof flashing to ensure a watertight seal around the chimney.
Instructions for installing storm collars to prevent water entry into the chimney.
Guidance on installing the chimney system through a chase, including spacing.
Details the 10-foot rule for chimney termination height above roof obstructions.
Guidelines for finishing the area around the fireplace with combustible and non-combustible materials.
Instructions for installing gas lines for decorative gas appliances.
Procedures for connecting gas lines, leak testing, and safety precautions.
Guidelines for operating glass doors, including safe open/closed positions.
Instructions for cleaning the fireplace glass doors safely and effectively.
Instructions for operating the outside air and damper handles for fireplace control.
Guidance on locating and ensuring the proper placement of the access cover plate.
Lists various refractory brick components by key number, part number, and description.
An exploded view diagram illustrating the various parts of the wood burning fireplace.
A comprehensive list of replaceable parts with key numbers, part numbers, and quantities.
Lists various chimney pipe sections, roof flashing, offset/return elbows, and firestop spacers.
Details accessories like hoods, glass doors, storm collars, and drain pans for fireplace functionality.
Details on firestop thimbles required for ceiling penetrations to prevent insulation intrusion.
Lists Canadian code requirements for chimney parts and climate kits.
