Superior DRT3033 - Gas Conversion Kits

Installation
900285-00 11/2014
Innovative Hearth Products
Superior
TM
DRT3000 Series Direct-Vent Gas Fireplaces
46
Table 30: Listed Secure Vent
®
Components
96K93 SV4.5SU Support Strap
S
e
a
l
a
n
t
10K81 SFMP
Mill-Pac, Black, High-
Temperature Sealant
99L02 SV4.5HRK14
Horizontal Riser Kit, 14”(see
750146M)
89L40 SFMP-12
Mill-Pac, Black, High-
Temperature Sealant
(bulk 12-pack)
99L03 SV4.5HRK36
Horizontal Riser Kit, 36”
(see 750146M)
Table 31: Listed Secure Flex
®
Components
Catalog
Number
Model Description
Catalog
Number
Model Description
These termination kits include firestop/spacer, gear clamps, and flex adaptor.
94L04 SFKIT12SS
Small Square Termination for flex, with
12” (305 mm) of *compressed flex vent
(see 750204M)
60L10 SF-18
18 ft (5.49 m)* compressed flex (see
750053M)
98K03 SF-12
12 ft (3.66 m)*compressed flex (see
750052M)
94L05 SFKIT18SS
Small Square Termination for flex, with
18” (457 mm) of *compressed flex vent
(see 750204M)
H2248 SF4.5HF-10
Firestop/Spacer, Horizontal, flex (3-1-1
spacing), 10 Pack
94L06 SFKIT24SS
Small Square Termination for flex, with
24” (610 mm) of *compressed flex vent
(see 750204M)
H2249 SF4.5VF-10
Firestop/Spacer, Vertical, flex (1-1-1
spacing),10 Pack
94L07 SFKIT36SS
Small Square Termination for flex, with
36” (914 mm) of *compressed flex vent
(see 750204M)
H1969 SF4.5HT-2
Horizontal Square Termination for flex
(without flex)
56L74 SFVT30
Vertical Termination for flex (flat to 6/12) with
flex adaptor, section of rigid vent, roof support
collar assembly, roof flashing and storm
collar. (see 750052M)
77L87 SFKIT12S
Square Term. for flex with
12” (305 mm)* compressed flex
77L88 SFKIT18S
Square Term. for flex with
18” (457 mm)* compressed flex
77L89 SFKIT24S
Square Term. for flex with
24” (610 mm)* compressed flex
56L75 SFVT45
Vertical Termination for flex (6/12 to 12/12)
with flex adaptor, section of rigid vent, roof
support collar assembly, roof flashing and
storm collar. (see 750052M)
77L90 SFKIT36S
Square Term. for flex with
36” (914 mm)* compressed flex
H7748 H7748
36” Flex Connector Kit.
36” of flex with two adaptors for
mating two rigid sections of vent
together.
77L91 SFKIT48S
Square Term. for flex with
48” (1219 mm)* compressed flex
91L66 SFGC4-6 Gear Clamp 4.5” (114 mm) for flex (6-pack)
91L67 SFGC7-6 Gear Clamp 7.5” (190.5 mm) for flex (6 pack)
*All compressed flex vents can be expanded up to two times.
** See Page 28 concerning use with the 45” model.