1-4
AOC-MTGN-i2S Add-on Card User's Guide
Cables Support
• SFP+ direct attach twinaxial copper cables up to 7m
• Fiber-optic cables (with required optional SFP+ transceivers)
Power Consumption
• Typical power consumption: 6.2W
• Maximum power consumption: 7.2W
Operating Conditions
• Operating temperature: 0°C to 55°C (32°F to 131°F)
• Storage temperature: -40°C to 70°C (-40°F to 158°F)
• Storage humidity: 90% non-condensing relative humidity at 35°C
Physical Dimensions
• Card PCB dimensions: 92mm (3.62in) x 87.1mm (3.43in) (W x D)
Optional Accessories
• AOC-E10GSFPSR: SFP+ transceiver module for short range ber cables (up to
300m), 10G/1G, 850nm, MMF, LC
• AOC-E10GSFPLR: SFP+ transceiver module for long range ber cables (up to
10km), 10G/1G, 1310nm, MMF, LC
• AOC-TSR-FS: SFP+ transceiver module for short range ber cables (up to
300m), 10G/1G, 850nm, MMF, LC
• AOM-TSFP-709DMZ-AVG: SFP+ transceiver module for short range ber cables,
10G/1G, 850nm, MMF, LC
• CBL-0347L: 1m 10GbE SFP+ to SFP+ copper cable, Passive, 30AWG, Pull Type
• CBL-NTWK-0347: 1m 10GbE SFP+ to SFP+ copper cable, Passive, 30AWG,
Push Type