13
Chapter 1: Introduction
Quick Reference Table
Jumper Description Default Setting
CLEAR CMOS Clear CMOS Switch Push Button Switch
JI2C1/JI2C2 SMB to PCI-E Slots Open (O): Disable
JPAC1 Audio Enable/Disable Pins 1-2 (Enable)
JPME2 Intel Manufacturing Mode Pins 1-2 (Normal)
JWD1 Watch Dog Function Enable Pins 1-2 (RST)
POWER BUTTON Internal Power Button Push Button Switch
RESET BUTTON Onboard System Reset Button Push Button Switch
SW1 Back Panel Clear CMOS Switch Push Button Switch
LED Description Color/State
BOOT LED Bootable Device POST (Power-On Self-Test) Status
Bootable Device POST: Orange ON
Bootable Device POST Completion: OFF
CPU LED CPU POST (Power-On Self-Test) Status
CPU POST: Yellow ON
CPU POST Completion: OFF
DIMM LED DIMM POST (Power-On Self-Test) Status
DIMM POST: Blue ON
DIMM POST Completion: OFF
LED1
Onboard Power LED
S3 (Suspend to RAM) LED
Power On: Green On
S3: Green Blinking
LED17 WLAN POST (Power-On Self-Test) Status
WLAN POST: Green ON
WLAN POST Completion: OFF
LED18 Bluetooth Device POST (Power-On Self-Test) Status
Bluetooth Device POST: Green ON
Bluetooth Device POST Completion: OFF
LED2 PCI-E M.2-M2 Socket LED
PCI-E Device Detected: Green ON
Activity: Green Blinking
LED3 PCI-E M.2-M1 Socket LED
PCI-E Device Detected: Green ON
Activity: Green Blinking
LED4 BIOS POST Code LED Digital Readout
VGA LED Onboard VGA POST (Power-On Self-Test) Status
Onboard VGA POST: Green ON
Onboard VGA POST Completion: OFF
Note: The table above is continued on the next page.
To Next Page
Loading...
