Supermicro C9Z490-PG - BIOS Update

Chapter 4: UEFI BIOS
131
4.9 BIOS Update
The following items will be displayed:
• BIOS Version
• BIOS Tag
• Date
• Time
Start Update
Use this utility to prepare BIOS Update with ME.
1. Click "Start Update" enter the SuperFlash utility.
2. At the prompt, select "Yes" to reboot and congure the system to Flash mode. Select
"No" to cancel and view the BIOS information.
3. After the system reboots to the ash mode, the system is ready to ash the BIOS. At
the prompt, slect "OK" to continue.
4. Select "Select File" and then in the pop-up menu select "General USB Flash Disk 1.00."
5. Select the lename (i.e., "C9Z490-PGW") in the pop-up menu.
6. Select "Start Flash" to ash the BIOS. A pop-up message will appear to show the
progress of the BIOS ash.
7. If the ash is successful, a pop-up message will indicate the result. Select "OK" to
complete the BIOS ash and to reboot the system. Check the System Information
section of the BIOS Setup to check for the correct BIOS version.